Shaped elements for sandwich panels

Due to the fact that ZMK Pulkovo is a manufacturer of sandwich panels used for plating prefabricated buildings and structures, shaped elements for sandwich panels occupy one of the most important places in the range of products manufactured by the plant.

When installing panels, it is especially important to use reliable shaped elements, since they additionally protect the filler (mineral wool or polystyrene foam) from penetration of moisture, dust, dirt and other environmental influences and prolong the life of the material.

In addition to solving technical problems, shaped elements of sandwich panels also carry an aesthetic function, giving the newly constructed building a complete look. They can also help realize the boldest design ideas in terms of the appearance of the building and its color solution.

Types of shaped elements for sandwich panels

Our company produces both standard and non-standard shaped elements for sandwich panels. A complete list of standard additional elements is presented in the corresponding section of the catalog of fastening points.

Most often when installing sandwich panels used:

The name of the additional element

Description

Appearance / Drawing

FE 1

is designed to close the joints of sandwich panels and the lower (protruding) part of the building

 Sketch of a shaped element FE 1 - socle

FE 4

closing joints of wall sandwich panels with each other

 Sketch of a shaped element FE 4 - joining of wall sandwich panels

FE 5

for placement in the joints of wall panels at the outer corners of structures

 Sketch of a shaped element FE 5 - corner of a building

FE 6

for closing joints at the inner corners of the building

Sketch of a shaped element FE 6 - internal angle 

ФЭ 11

In the junction of sandwich panels with windows, doors, gates, etc.

Sketch of a shaped element FE 11 - windows, doors, gates 

FE 12

Sketch of a shaped element FE 12 - doors, windows, gates 

FE 13

 Sketch of the shaped element FE 13 - windows, doors, gates

FE 14

Adjunction, overhangs, etc.

Sketch of a shaped element FE 14 - abutment of sandwich panels, overhangs 

FE 21

Parapet

Sketch of a shaped element FE 21 - parapets 

* The thickness of the metal is 0.5-1.5 mm, the maximum length of the shaped element is 6 m.

Scheme of additional elements for sandwich panels

Scheme of additional elements for sandwich panels

The price of shaped elements for sandwich panels

The cost of shaped elements for sandwich panels starts from 100 rubles. for 1 running meter. The prices take into account such components as:

- the size of the order;

- sizes of additional elements;

- type of coating, color;

- availability of special offers, promotions and discounts.

Buy in St. Petersburg shaped elements for sandwich panels

To buy shaped elements for sandwich panels in St. Petersburg or order them in any other region, please contact our managers (our contact details are listed in the relevant section of the site).

You can get the products in the warehouse of the plant located in the city of St. Petersburg, or order delivery anywhere in the Russian Federation using the vehicles of your own vehicle fleet ZMK Pulkovo or the services of third-party carrier organizations.

Delivery to other countries is also possible.

You may also be interested in:

- general information about shaped elements;

- additional elements for the roof of metal tile.